<td id="7163h" ></td>
    1. <font id="7163h" ></font>
    2. <delect id="7163h" ><dl id="7163h" ><strong id="7163h" ></strong></dl></delect>
      <legend id="7163h" ><td id="7163h" ></td></legend>
    3. <ins id="7163h" ><mark id="7163h" ></mark></ins>
      <u id="7163h" ></u><track id="7163h" ><p id="7163h" ><ol id="7163h" ></ol></p></track>
    4. <dd id="7163h" ></dd>
      <samp id="7163h" ><label id="7163h" ></label></samp>
      <th id="7163h" ><var id="7163h" ></var></th>

          $15.00

          This Switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handles up to 5A.

          In stock

          SKU: SWITCH-10-5A-R1-RP
          HS Code: 8534.00.00.40

          Product Description

          This Switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handling up to 5A of current and 120V, you can use it to directly operate low power circuits or interact with a microcontroller to provide input for the operation of your vehicle.

          This design has been tested to 1000m water depth.

          Product Description

          This Switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handling up to 5A of current and 120V, you can use it to directly operate low power circuits or interact with a microcontroller to provide input for the operation of your vehicle.

          This design has been tested to 1000m water depth.

          Contents

          • 1 x Switch Bolt
          • 1 x Switch Dial
          • 1 x Switch Nut
          • 1 x Penetrator O-Ring
          • 1 x Switch Dial O-Rings
          • 1 x 30-3UL Button
          • 2 x Wire Leads

          Specification Table

          ParameterValue
          Electrical
          Operating VoltageUp to 120V AC
          Operating CurrentUp to 5A
          Wire Size22 AWG
          To Turn ONClockwise / Red
          To Turn OFFCounter-clockwise / Gray
          Input Connector0.1" Male Header Pin
          Output Connector
          Physical
          Maximum Depth (Saltwater)1,000 m 3,280 ft
          Maximum Pressure9,810 kPa1,430 psi
          Recommended Thru Hole Size10 - 11 mm0.4 in
          Maximum Wall Thickness13 mm0.5 in
          Wrench Flats16 mm5/8 in
          Bolt O - RingAS568-03, Buna-N
          Plug O - Rings2mm Wide, 6mm ID, Buna-N

          2D Drawings

          Switch 2D Drawing

          3D Models

          SWITCH-10-5A-R1 (.zip)

          Documents

          (PDF)

          Revision History

          13 April 2018

          • Dial sticker is replaced with printed on arrows.

          20 October 2016

          • R1 – Initial Release

          Quick Start

          1. Assemble according to the installation instructions.
          2. Turn the dial all the way clockwise to turn the Switch ON.
          3. One full counter-clockwise turn will turn the Switch OFF.

          Guides

          Switch Installation
          Learn how to quickly install the Switch on a WTE for your project!

          Community

          Blue Robotics Forums – Product Support